Description
NEENAH HEAT TRANSFER PAPER – TECHNI-PRINT® EZP- Made in USA
For LaserJet Printer Use
TECHNI-PRINT® EZP Heat Transfer Paper is for transferring photos and graphics to WHITE and LIGHT COLOUR FABRIC, is easy to use yet gives crisp vibrant images regardless of the model of the laser printer or copier. Also, Indigo® certified for the 7000 – 1000 series of printers.
– Heat press required.
– The image should be printed in REVERSE.
For full video-check out https://www.youtube.com/watch?v=WF5TjiMtc98
TECHNI-PRINT® EZP Heat Transfer Paper is for transferring photos and graphics to white and light coloured fabrics, is easy to use yet gives crisp vibrant images regardless of the model of the laser printer or copier. Also, Indigo® certified for the 7000 – 1000 series of printers.
– Heat press required.
– The image should be printed in REVERSE.
PRINTING
1. Print the image in reverse/mirrored format using a heavy paper mode.
2. Trim away the unprinted areas of the transfer if desired.
PRE-TRANSFERRING
Prepare the garment/fabric by ensuring the surface is clean, dry, and wrinkle-free using a lint brush and your heat press.
TRANSFERRING
1. Place the transfer on top of the garment with the print image against the fabric.
2. Press 30 seconds at 375°F/190°C using a medium to heavy pressure (40 to 70 psi/3 to 5 bar).
3. For best results leave on the heat press, wait 10 to 15 seconds depending upon the fabric and then peel the paper in a smooth even motion (hot peel).
4. To improve the feel or “hand” and get even better wash durability, stretch the garment in all directions while still hot.
5. If desired, wait and peel the paper after cooling completely (cold peel). This method gives a stiffer “hand” but it is quicker and works well for hard surfaces.
6. You can then improve the softness and get even better wash durability by covering the image with parchment paper, repressing for 10 seconds and immediately stretching in all directions while still hot.
EXTRA SOFT FABRIC METHOD
1. Alter pressing step to 10 to 15 seconds at 375°F/190°C using a medium to heavy pressure (40 to 70 psi/3 to 5 bar).
2. Remove from press and peel the paper after cooling (Do not stretch).
3. Place the garment back on the heat press and cover the image with parchment paper.
4. Press using medium to heavy (40 to 70 psi/3 to 5 bar) pressure for 25 seconds to fully bond the image to the garment.
5. Remove the parchment paper and immediately stretch the garment in all directions to soften, improving the “hand”, and also improving the wash durability.
WASHING
Turn garment inside out and wash in cold water using a mild detergent. Do not use bleach. Dry on low-heat setting. If you intend to iron the transferred area, ensure that the image is covered with parchment paper before ironing.
STORAGE & HANDLING
Store Heat Transfer Paper in a cool, dry area and do not remove from carton or polybag until you are ready to use.
IMPORTANT: Printers and heat presses vary in their accuracy. We recommend that you test the paper in your equipment to ensure the best results.
